This post explains how to fix a Flexispot standing desk when an "RST" error appears and it stops working.
Introduction
I use a Flexispot standing desk.
One day, an error message like the one below appeared, and the desk stopped moving.
Here’s a quick memo on how to fix it.
※ My model is the E7 Pro, but this solution should work for most Flexispot models.
Note: This article was translated from my original post.
How to Fix the RST (ASR, A5R) Error on a Flexispot Desk
What Does This Error Mean?
First, it's hard to tell what this error actually says. It could look like:
- ASR
- A5T
- RST
- AST
- A5r
Depending on how you read it, it could be any of these.
According to the Flexispot manual, the correct reading is "RST", which stands for "Reset".
This message is telling you to perform a reset operation.
How to Fix It
The solution is simple:
Lower the desk all the way to the lowest position. Keep holding the down button, and after a moment, the desk will move up slightly, indicating that the reset is complete.
Ref: Flexispot manual
After doing this, the error disappeared, and my desk started working again.
All good!
Conclusion
That’s how I fixed the RST error on my Flexispot standing desk.
Since the error message is a bit tricky to read, I couldn’t find a solution right away, so I decided to write this post.
I hope this helps someone!
